मेरे पिछले नोट की निरंतरता में, हम
एक पूर्ण USB- पुनर्निर्देशित के साथ Thinstation 5.0 और VMWare View 5.0 क्लाइंट के दोस्त हैं, परीक्षणों के लिए यह एक "USB अग्रेषण" के साथ क्लाइंट वर्जन 5.0 बनाने के लिए आवश्यक था जो लिनक्स पर काम करेगा। चूंकि मैं सभी उबंटू में से सबसे अच्छा जानता हूं - पैकेज उसके लिए संकलित है। बिल्ली के नीचे तैयार पैकेज संस्करण 5.0।
मैं समझाता हूं कि मुझे पहिया क्यों मजबूत करना था: फिलहाल उबंटू भागीदार भंडार से
आधिकारिक क्लाइंट में कोई यूएसबी अग्रेषण नहीं है, और
इसे स्थापित करने पर लेख के संस्करण 4.6 क्लाइंट विभिन्न कारणों से काम नहीं करता है। इसलिए,
VMWare View 1.4 के
आधिकारिक क्लाइंट को HP ThinPro श्रृंखला के पतले ग्राहकों के लिए लिया गया था। दुर्भाग्य से, dpkg ने मेरे द्वारा उठाए गए पैकेज को पूरी तरह से नजरअंदाज कर दिया, लेकिन मैं इसे अपने सिस्टम में बस अनपैक नहीं करना चाहता था - इसलिए मैंने इसे वापस लेने का उपक्रम किया।
अंत में, मैंने इसे उपरोक्त "मूल" से ऐसे मतभेदों के साथ इकट्ठा किया:
- पैकेज स्थापना के दौरान USB अग्रेषण कार्यक्षमता को सक्षम करना;
- आधिकारिक क्लाइंट से लिए गए, अप्रयुक्त खारिज किए गए आइकन के प्रतिस्थापन;
- मेनू में ग्राहक पंजीकरण, सिस्टम में स्थापित अन्य कार्यक्रमों के बीच;
- समझौता और संदर्भ केवल अंग्रेजी में हैं।
सैद्धांतिक रूप से, यदि आप एक संग्रह के रूप में .deb पैकेज को अनपैक करते हैं, तो क्लाइंट को किसी भी लोकप्रिय वितरण में काम करना चाहिए। महत्वपूर्ण निर्भरताओं में से, मैंने केवल libssl0.9.8 पुस्तकालय पर ध्यान दिया, जो कि उबंटू 11.10 के आधार वितरण में नहीं है। चलो इसे ठीक करते हैं:
apt-get install libssl0.9.8
अब पैकेज स्थापित करें:
dpkg -i vmware-view-client.deb
इकट्ठे .deb पैकेज को
यहां एकत्र किया जा सकता
है ।
दर्पण । यह ठीक काम करता है, यह कई मशीनों पर परीक्षण किया गया था।
रूपांतरित एलियन .rpm पैकेज
यहां लें ।
दर्पण । दुर्भाग्य से, मैं इसे सत्यापित नहीं कर सका, कृपया, सदस्यता समाप्त करें, जो इसके कार्य का परीक्षण कर सकेगा।
परीक्षण के लिए एक फ्लैश ड्राइव जुड़ा हुआ था। इसके बाद, यह पता चला कि परीक्षण लैपटॉप में एक USB बस में एक ब्लूटूथ लटका हुआ है। सब कुछ काम करता है, मैंने असाइन किए गए कार्य को प्राप्त किया। लॉग के नीचे।
VMware-दृश्य-USB-8007.log:
Apr 20 19:41:48.611: vmware-usb| Log for VMware Workstation pid=8007 version=7.1.0 build=build-636740 option=Release Apr 20 19:41:48.611: vmware-usb| The process is 32-bit. Apr 20 19:41:48.611: vmware-usb| Host codepage=UTF-8 encoding=UTF-8 Apr 20 19:41:48.611: vmware-usb| Starting... Apr 20 19:41:48.612: vmware-usb| USB: Unable to open "/proc/bus/usb/devices" (No such file or directory). Apr 20 19:41:48.612: vmware-usb| USBGL: USB Sysfs found at /dev/bus/usb Apr 20 19:41:48.732: unknown| Remote USB status reported, state: available Apr 20 19:41:48.732: unknown| Device attributes: Name: ASUSTek Bluetooth Adapter, Id: vid2821(0x0b05)&pid5906(0x1712), Family: , Path: bus4,port3 Apr 20 19:41:48.732: unknown| 'ASUSTek Bluetooth Adapter' is allowed. Path: 578 Apr 20 19:41:48.733: unknown| InitDbus: Unable to connect to DBus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. Apr 20 19:41:48.733: unknown| ASUSTek Bluetooth Adapter is being redirected Apr 20 19:41:49.611: vmware-usb| USBG: CONNREQ: Dequeued head request after 878 ms for [name:ASUSTek\ Bluetooth\ Adapter vid:0b05 pid:1712 path:4/2 speed:full family:other,wireless,bluetooth] Apr 20 19:41:49.613: vmware-usb| Unexpected error received 2 from USBDEVFS_CONNECTINFO Apr 20 19:41:49.869: vmware-usb| Claimed 'ASUSTek Bluetooth Adapter' device, Plug No: 1 Apr 20 19:41:49.921: vmware-usb| Sending device plug-in to desktop, plug No:1 Apr 20 19:41:49.922: vmware-usb| Sent device plug-in to desktop, plug No:1 Apr 20 19:41:49.927: unknown| Remote plug-in response, Plug No: 1, RespType: Ok, Remote Version: 3 Apr 20 19:41:49.927: unknown| Device attributes: Name: Kingston DT101 G2, Id: vid2385(0x0951)&pid5698(0x1642), Family: storage, Path: bus1,port4 Apr 20 19:41:49.927: unknown| 'Kingston DT101 G2' is allowed. Path: 786 Apr 20 19:41:49.928: unknown| InitDbus: Unable to connect to DBus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. Apr 20 19:41:49.928: unknown| Kingston DT101 G2 is being redirected Apr 20 19:41:49.929: vmware-usb| Device doesn't have a product string. Apr 20 19:41:49.929: vmware-usb| USBG: CONNREQ: Dequeued head request after 1 ms for [name:Kingston\ DT101\ G2 vid:0951 pid:1642 path:1/3 speed:high family:storage] Apr 20 19:41:49.986: vmware-usb| Claimed 'Kingston DT101 G2' device, Plug No: 2 Apr 20 19:41:49.988: vmware-usb| Sending device plug-in to desktop, plug No:2 Apr 20 19:41:49.988: vmware-usb| Sent device plug-in to desktop, plug No:2 Apr 20 19:41:50.199: unknown| Remote plug-in response, Plug No: 2, RespType: Ok, Remote Version: 3 Apr 20 19:41:50.650: vmware-usb| USBGL: SETCONFIGURATION=1 failed -1:16:Device or resource busy, work around triggered Apr 20 19:42:05.776: vmware-usb| Disconnecting all devices Apr 20 19:42:06.119: vmware-usb| USBGL: RELEASEINTERFACE=0 failed -1:22:Invalid argument Apr 20 19:42:06.119: vmware-usb| USBGL: USBDEVFS_CONNECT(0) failed -1:16:Device or resource busy Apr 20 19:42:06.119: vmware-usb| USBGL: RELEASEINTERFACE=1 failed -1:22:Invalid argument Apr 20 19:42:06.119: vmware-usb| USBGL: USBDEVFS_CONNECT(1) failed -1:16:Device or resource busy Apr 20 19:42:06.119: vmware-usb| USBGL: RELEASEINTERFACE=2 failed -1:22:Invalid argument Apr 20 19:42:06.119: vmware-usb| Released device, Plug No: 1 Apr 20 19:42:06.370: vmware-usb| USBGL: RELEASEINTERFACE=0 failed -1:22:Invalid argument Apr 20 19:42:06.370: vmware-usb| USBGL: USBDEVFS_CONNECT(0) failed -1:16:Device or resource busy Apr 20 19:42:06.370: vmware-usb| Released device, Plug No: 2 Apr 20 19:42:06.370: vmware-usb| Disconnecting all devices completed Apr 20 19:42:06.370: vmware-usb| Exiting.